DEGERtraker 9000NT & 6000NT
01. Experience leads to progression – as we have proven in practice since 1999
02. Maximum additional yields – DEGERtraker up to 45%, TOPtraker up to 30% more than fixed systems
03. Also suitable for desert and equatorial regions
04. Minimal own consumption – well-engineered mechanics make it possible to use cost-effective mini DC motors
05. Short assembly times
06. TÜV tested and certified
07. Robust: Most grueling stress tests of the Stuttgart Materials Testing Institute (MAP)
08. Flexible assembly system – suitable for all standard module and inverter types
09. Minimum maintenance outlay
10. Extremely long life span
11. 99.9% recyclable due to an aluminum and steel construction
12. Low shipping costs
13. Impressive value
0
K-FLASH™
K-FLASH™ is a 100% mechanically watertight flashing.
Textured, powder-coated black finish blends well with all asphalt.
Made of aluminum, K-FLASH™ is lightweight and easy to install between roof-mount block.
K-RACK™
K-RACK™ is manufactured from high-strength, commercial grade extruded aluminum and packaged with stainless steel hardware.
K-RACK™ allows for quick installation and easy cable.
K-RACK™ is a complete solar panel racking system that is ideal for asphalt and steel pitched roofs, ground mounts, agricultural, commercial and industrial flat roofs. Our system can also be used to roof-mount satellite dishes.
Innovative Technology
Proven success
207 successful projects & 14 megawatts
Installations in 27 states, Canada and Europe
Customers include Fortune 500, corporate, education, government, medical and retail end users
More power
35? angle increases kilowatt hour production by 10-20% over standard systems (Ballast-based competitors can't exceed 20?)
Higher annual power production provides higher return on investment SolarDock can be produced from 15 to 35? angles
Supports incentives and PPA providers valuing annual power production over power density
Next-generation technology
120 MPH wind certified (ASCE 7-05)
California DSA pre-check approved
Made in U.S. and Canada
OPA Fit compliant in Canada
Lightweight - system averages less than 5 pounds/sf in 90 mph wind zones
Dock ventilation ensures no energy degradation due to heat buildup
Fixed asset with no moving parts
Aesthetic design
Roof-friendly
Only truly non-penetrating system
System protects both the surface membrane and the structure
Foam supports dock and ballast - no metal touches the roof
Weight is distributed broadly and evenly
No sharp metal edges or unprotected CMU blocks
Dock allows for unrestricted water drainage
Easy to pull apart to move or access roof
Protects the panel and wires
Panels sit on upper and lower edges of docks only, preventing micro-fissures and stress fractures in panels.
SolarDock encapsulates DC wires, protecting them from UV rays and bird/rodent damage
Wiring and ballast are encapsulated - protected and hidden - but still easily accessible
ISYS Ground Mount
Designed to deliver the most cost effective systems with the most responsive and scalable supply chain, ISYS Ground Mount has an industry leading installation rate of more than 10 modules per man-hour.
The extreme strength to weight ratio of components make IGM the clear choice for large scale PV projects.
IGM is assembled in the field, not built. The components require zero fabrication – no field welding, drilling, or cutting. Through smart design and pre-fabricated sub-assemblies, IGM is one of the fastest systems to install with the least amount of labor.
Optimized for projects ranging from 500 kilowatts to gigawatts, IGM structural materials come from a single source specifically packed and custom designed for each customer’s module and site conditions. Unirac recommends ULA for projects under 500kW.
Warranty terms are defined in project sales agreements.
SunMount
Features and Benefits
No roof penetrations – eliminates potential for leakage to building interior
Light weight – Weighs less than 3 lbs/sq. foot including the PV panel, therefore no structural strengthening is required Easy to install – The Sunmount is manufactured almost as a complete unit requiring the minimum amount of components and effort to install. This eliminates disruption and decreases installation time Wind tunnel tested and certifed to withstand a wind speed of 180 km/h or 112 mph Aesthetics – fush modules in the mount give an integrated appearance Modular Construction – The SunMount is designed as a wedge shaped modular mounting unit, which can be interlocked with other units to form an integrated solar array of any shape or size 10 degree optimum tilt angle – The angle of the SunMount has been optimized to maximize the watts per sq. foot and the lower profile prevents the danger of increased roof loads due to snow drifting Pressure equalization vents – vents at the top of the SunMount ensure modular stability at high wind, air circulation and module cooling Easy to disassemble so repairs and roof maintenance can be carried out Protects the roof from UV and thermal cycling. Total coverage of the roof by the solar array protects the roof from the harmful effects of the sun and extends roof life. Also increases the R-value, reducing energy usage Manufactured in Cobourg, Ontario, Canada Third party engineering reports available upon request SunMount is manufactured and distributed in Canada by Solion Canada
